So what have I been doing? Yes you guessed it! Machine embroidery!
I have been busy embroidering a whole load of tea towels I had. Fun just putting simple lettering on them.
Here are a few photos:
I have done over 40 teatowels! A lot have already left the house.
Between doing those and masks I have been very busy. Now I need to catch up with some sewing that is all piled up here!
Have a nice day!
I am continuing my machine embroidery experiments.
An Eagle:
Yesterday I decided to try some appliquè. Just very simple.
I took some blue fabric and then some white on top. I stabilized the blue with tear away stabilizer. I basted the white at the corners floating on the frame. I didn't use any glue. I don't have any yet and to be honest I am scared of getting my frames and machine sticky. I keep seeing FB posts asking how to remove the glue!
I chose a simple circle design on my machine and stitched it out.
Then I took the frame off the machine and carefully cut the excess white fabric from the outside of the stitching. I replaced the frame and then did another programmed circle with a satin stitch in the exact same place.
Then I added a simple E in the center. All without altering the position of the hoop design.
It was quite fun and simple enough for me to not worry about spoiling a project.
I have no idea what if anything I will use it for but another practice piece is done. Lol!
It is lovely to be trying out "new to me" things. Even cross stitch!
Bye for now! Happy sewing.
Well I have a new love in my life....machine embroidery!
I bought a Brother Innovis F440e embroidery only machine. I already have a good sewing machine.
An embroidery machine is something I have wanted for a long time.
I was very scared in case I didn't manage to learn to use it. There are no local lessons available. Fortunately there are many videos online and I managed to find some with the machine I had ordered.
I also found the instruction book online and read and reread that many times before my machine arrived.
I found that machine embroidery is a whole new world.
Ordinary sewing thread is not used but special 40 weight embroidery thread. There are many brands and different sorts of thread. I ordered some New Brothread. A pack of different colours so I had a starting selection.
Then there is the bobbin thread. My machine takes 90 weight bobbin thread which is very thin and resistent. I ordered pre-wound bobbins which work beautifully so far!
Other machines which are combined sewing and embroidery machines use 60 weight bobbin thread. It is important to check the instruction book with the machine.
After learning that I had to find out all about different stabilizers! The fabric in the hoop needs stabilizing to embroider well. I bought some online and also bought a starter pack with various types to try and a super help it had an instruction booklet for newbies like me!
Everything bought online as there are no local shops who have these things.
As soon as my machine arrived I tried it. I was lucky as it threaded and worked fine first time! I was shaking as I tried it! Lol!
The first thing I wrote was my name!
Then I started slowly working through a mountain of teatowels I have to embroider!
Obviously with Covid-19 still around masks were another must to make:
Now the latest thing I have embroidered were some towels. I found a letter E which fit into the oval on the big towel. For the smaller one I remembered that I can reduce the design size slightly so I thought to try that. It worked! The machine actually automatically recalculated the stitch density as well and number of stitches. It took over 1000 sts less and a minute less to embroider! I was fascinated! Magic! Lol!
So much more to add! But now I am going to go and do some embroidery!
